Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Cautions Should Be Taken When Configuring a Layer 2 Access Network Between APs and the Gateway on a WLAN?
All downlink ports connected to APs on access and aggregation switches must be isolated from each other. If a packet transport network (PTN) is deployed between APs and the gateway, use leased lines but not a private network.