Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a New Password for a WS6603
A super administrator or administrator can change the password of itself or a user with a lower level. When changing the password of a user with a lower level, the super administrator or administrator does not need to enter the old password of this user.
A common user or operator can only change its own password and must enter the old password before setting a new password.
- Create a user account operator and set the user level to operator, number of login attempts to 2, and appended information to operator.
WS6603> enable WS6603# terminal user name User Name(length<6,15>):operator User Password(length<6,15>): Confirm Password(length<6,15>): User profile name(<=15 chars)[root]: User's Level: 1. Common User 2. Operator 3. Administrator:2 Permitted Reenter Number(0--4):2 User's Appended Info(<=30 chars):operator Adding user succeeds
- Use an administrator account to log in to the system, and set the password for the operator user to huawei@123.
WS6603> enable WS6603# terminal user password User Name(length<6,15>):operator New Password(length<6,15>): Confirm Password(length<6,15>): Information takes effect
