Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Users Have Been Connected and Assigned IP Addresses, but There Is No User Information in the display access-user Command on the AC. Why?
Check whether Portal authentication is configured. If Portal authentication is configured, user information is displayed on the AC only after users are authenticated successfully.