Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Which WLAN Components Are Commonly Used?
The following WLAN components are commonly used:
- Splitter: divides a signal into two or more signals.
- Coupler: divides a signal on a port into uneven signals on multiple output ports.
- Attenuator/Load: reduces the amplitude or power of a signal without appreciably distorting its waveform. The load is a special attenuator with unlimited attenuation. The load connects to the unused output radio port, preventing radio interference.
- Combiner: combines radio signals of multiple systems over one channel and distributes receive signals over one channel to ports of each system without interference. Combiners are classified into single-band combiners and multiple-channel combiners.
- Connector:
- Type N connector
- SMA connector
- Type N connector
- Protection components
- Surge protection device
- Other protection components: optical fiber tube, ground cable, and waterproof tape
- Surge protection device
