Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Do Channel and Power Changes Cause Service Interruption on STAs During Automatic Radio Calibration?
- When the working channel of an AP changes during radio calibration, services on STAs are not interrupted if the channel switch announcement function is enabled and supported by STAs. If this function is disabled or supported by STAs, services on STAs may be interrupted.
- If the transmit power of an AP reduces after radio calibration, the wireless coverage range decreases, which may cause service interruption on STAs.