Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Measures Should Be Taken When an AP Fails to Obtain an IP Address Using DHCP?
Perform the following steps to locate the fault:
- Check whether the AP is configured to obtain an IP address using DHCP.
- Check whether the Layer 2 link between the AP and DHCP server is working properly.
- Run the display ip pool name ip-pool-name used command on the DHCP server to check whether the AP has obtained an IP address.