Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the Registration Procedure When a Fit AP and an AC Are Connected Directly or over a Layer 2 Network?
The following figure shows the procedure for a Fit AP to register with an AC when they are connected directly or over a Layer 2 network.
The registration procedure is as follows:
- The Fit AP obtains a Fit AP IP address and DHCP server IP address from the DHCP server.
- The Fit AP broadcasts a Discovery Request message at Layer 2 to attempt to associate with an AC.
- After receiving the Discovery Request message, the AC checks whether the Fit AP has the access right. If the Fit AP is authorized, the AC replies with a Discovery Response message.
- The Fit AP downloads the latest software version from the AC.
- The Fit AP downloads the latest configurations from the AC.
- The Fit AP exchanges service data packets with the AC.