Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Troubleshooting Cases for Reliability Issues
- Case Study: VRRP Switchback Fails Due to a Short Recovery Delay of the VRRP Group
- Case Study: A Dual-Link Switchover Occurs When the Active Link Is Normal
- Case Study: When the Active AC Is Faulty, APs on the Active AC Fail to Go Online on the Standby AC
- Fault Case: In a Dual-Link Scenario, an Active/Standby AC Switchover Occurs and a Revertive Switchover Is Performed. Before the Revertive Switchover, the AP Restarts. After the AP Goes Online Again, an Incorrect Active/Standby AC Is Selected
- Case Study: In a Dual-Link Scenario, an AP Does Not Select an AC with a Higher Priority to Go Online
- Case Study: After the Active and Standby ACs Are Upgraded and Restarted, APs Go Online on the Standby AC but Not on the Active AC
- Fault Case: In AC HSB Scenarios, New STAs Cannot Go Online and All APs Go Offline After an Active/Standby AC Switchover
- Case Study: Wireless Configuration Synchronization Does Not Take Effect