Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Replace a Faulty AP to Accelerate Service Recovery?
To replace the AP that associates with an AC with a new AP without reconfiguring data for the new AP, run the ap modify command in WLAN view to change the MAC address and serial number (SN) of the faulty AP to those of the new AP. The new AP must be of the same type as the faulty AP.
After the modification, the new AP with the ID of the previous AP re-associates with the AC and inherits all the data configured on the previous AP.