Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Know Whether an AP Has Obtained an IP Address?
If the address pool for APs is configured on an AC, run the display ip pool name ip-pool-name used command on the AC. If the command output displays an AP's MAC address and a corresponding IP address, the AP has obtained an IP address.
We can also run the following command to make sure IP address.
- V200R005 and earlier versions: Versions earlier than V200R007C20 and V200R008C00: display ap-run-info id ap-id
- V200R006 and later versions: V200R7C20 and versions later than V200R008C00: display ap all