Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Is Redundancy Used or a Proximate AP Selected as a Repeater AP to Ensure That Other WDS Bridges Work Properly When the Middle AP Is Faulty or Powered Off?
When the root or middle node is faulty, uplinks between this node and downstream nodes are disconnected. Limited by frequency resources, Huawei network bridge solution does not use the redundancy mode. It is recommended that mains be used or the UPS be added to provide power for the AP.
Starting from V200R003C00, the AP can support Mesh functions. APs enabled with Mesh functions can set up radio connections. Mesh links can work as backup of each other. If a neighbor node of an MP fails, the MP can select an optimal link from candidate links to continue data transmission.