No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
H801SPUC Board Description

H801SPUC Board Description

The H801SPUC board is a service processing board, and it implements extended functions of the OLT upstream interface. This board is mainly used in the Open Access scenario and is used as an upstream interface board.

Functional Specifications

Please refer to "SPU Service Process Boards Comparison".

Technical Specifications

Please refer to "Power Consumption and Maximum Frame Size of Boards".

Working Principle

Figure 3-52  Working principle of the H801SPUC board

The basic working principle of the H801SPUC board is as follows:

  • The control module loads the board software, controls the running of the board, and manages the entire board.
  • The interface module receives signals and then transmits the signals.
  • The service processing module processes Ethernet packets, processes and forwards service data packets, and implements service flow management.
  • The power module draws -48 V power from the backplane and converts the power into working power for each functional module of the board.
  • The clock module provides clock signals for each functional module of the board.

Front Panel Port



For details about supported optical module, see 10GE Optical Module and GE Optical/Electrical Module.

Cable

The LC optical connector used in H801SPUC is shorter than the average LC optical connector.

For details about supported optical module, see 10GE Optical Module and GE Optical/Electrical Module.

Indicator

Indicator

Name

Color

Status

Meaning

RUN ALM

Running status indicator

Red

Blinking

The board enters the APP start phase during the board startup

Green

Blinking quickly (on for 0.25 s and off for 0.25 s repeatedly)

The board enters the phase of communication with the control board during its startup

Green

Blinking slowly (on for 1 s and off for 1 s repeatedly)

The board works in the normal state

Orange

Blinking

A high-temperature alarm is generated

Red

On

The board is faulty

10GE(0-3),GE(4-43)

Link status indicator

Green

On

A connection is set up on the port

Green

Blinking

Data is being transmitted on the port

-

Off

No connection is set up on the port

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 151363

Downloads: 3501

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next