No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Filler Panel

Filler Panel

A filler panel is used to cover a slot that is not in use in a subrack.

Functions

The filler panel supports the following functions:

  • Prevents electrical parts in the subrack from being exposed.
  • Prevents foreign objects from entering the subrack.
  • Ensures that the subrack meets electromagnetic interference (EMI) requirements.
  • Ensures that cold air inside the subrack flows along the specified air channel.
  • Helps to lay out cables reserved for future capacity expansion when the filler panel provides interfaces.

Filler panels must be installed in the vacant slots in the subrack. Otherwise, heat dissipation of the boards will be affected.

Description

Table 3-228 describes the applicable slots, dimensions, and appearance of filler panels.

Table 3-228  Applicable slots, dimensions, and appearance of filler panels

Slot

Appearance (View of the Horizontally Placed Board)

Dimensions (W x H)

Control board slot

MA5600T/MA5603T: 25.40 mm x 395.40 mm

MA5608T: 35.56 mm x 134.84 mm

Power board slot

MA5600T/MA5603T: 25.40 mm x 105.10 mm

Slot for universal interface board

25.40 mm x 183.20 mm

Service board slot in the service subrack

  • Default configuration:

  • Pre-installing cables is required (in future when the ADPE, CAME, or VDPE board is configured):

22.86 mm x 395.40 mm

GIU slot in the service subrack

25.40 mm x 197.20 mm

Service board slot in the SPL subrack

  • Pre-installing cables is not required (same as the filler panel in the service board slot of the service subrack):
  • Pre-installing cables is required (in future when the 48-port or 64-port SPL board is configured):

22.86 mm x 395.40 mm

GIU slot in the SPL subrack

25.40 mm x 395.40 mm

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 152102

Downloads: 3506

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next