No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
H801SPUF Board Description

H801SPUF Board Description

The H801SPUF board is a multifunctional service processing board, expanding ARP and ND entries and route entries and enhancing Layer 3 forwarding capabilities.

Functional Specifications

Please refer to "SPU Service Process Boards Comparison".

Technical Specifications

Please refer to "Power Consumption and Maximum Frame Size of Boards".

Working Principle

Figure 3-53  Working principle of the H801SPUF board

The basic working principle of the H801SPUF board is as follows:

  • The control module loads the board software, controls the running of the board, and manages the entire board.
  • The service processing module processes the upstream services and data packets of the services.
  • The power module draws -48 V power from the backplane and converts the power into working power for each functional module of the board.
  • The clock module provides clock signals for each functional module of the board.

Front Panel Port



For details about supported optical module, see 10GE Optical Module and GE Optical/Electrical Module.

Indicator

Indicator

Name

Color

Status

Meaning

RUN ALM

Running status indicator

Red

Blinking

The board enters the APP start phase during the board startup

Green

Blinking quickly (on for 0.25 s and off for 0.25 s repeatedly)

The board enters the phase of communication with the control board during its startup

Green

Blinking slowly (on for 1 s and off for 1 s repeatedly)

The board works in the normal state

Orange

Blinking

A high-temperature alarm is generatedm

Red

On

The board is faulty

ACT

Active indicator

Green

On

This board is active

Green

Blinking

This board works in the load-balancing mode

-

Off

This board is standby

LINK/ACT

Optical port indicator

Green

On

A connection is set up on the port

Green

Blinking

Data is being transmitted

-

Off

No connection is set up on the port

MODE

Optical port mode indicator

Green

On

Port is working in the appropriate mode

-

Off

Port is not working in the appropriate mode

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 151079

Downloads: 3501

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next