No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Physical Specifications

Physical Specifications

This topic provides the dimensions and weight of the N66E-18 dual-standard cabinet.

Dimensions and Weight

Figure 1-25  Dimensions of the N66E-18 dual-standard cabinet

Table 1-5  Dimensions and weight of the N66E-18 dual-standard cabinet



Standard compliance

  • ETSI side (21-inch): ETSI 300 119-3
  • IEC side (19-inch): IEC 60297-3

Weight (empty cabinet)

67.3 kg

Dimensions (W x D x H)

600 mm x 600 mm x 1800 mm

Installation dimensions of the cabinet top

Installation interface
  • Hole positions: 450 mm x 400 mm (W x D)
  • Nut specifications: six M8 nuts

Installation dimensions of the cabinet bottom

Installation interface
  • Hole positions: 413 mm x 487 mm (W x D)
  • Bolt specifications: four M12 expansion bolts

Distance between mounting bar holes

  • ETSI side: 1 SU = 25 mm
  • IEC side: 1 U = 44.45 mm

Available space

  • ETSI side: 67 SU
  • IEC side: 37 U

Angle opening width

  • ETSI side: 500 mm
  • IEC side: 450 mm

Fixing centres

  • ETSI side: 515 mm
  • IEC side: 465 mm

Distance between the installation surface of the mounting bar and the inner side of the cabinet door

  • ETSI side: 54 mm
  • IEC side: 95 mm

For cabinet power specifications, see relevant PDB specification requirements.

Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 155939

Downloads: 3551

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next