No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power Consumption and Maximum Frame Size of Boards

Power Consumption and Maximum Frame Size of Boards

You can query power consumption, maximum frame size, and normal operating temperature of all boards.

Table 3-4 lists the power consumption and maximum frame size of boards. "-" indicates N/A.

The operating temperature of all the boards is -40°C to +65°C. The lowest board startup temperature is -25°C.

NOTE:
  • The power consumption of the board is tested in the following conditions:

    • Working voltage: -53.5 V DC.
    • Ambient temperature: 25 °C.
    • Static power consumption: All ports do not carry any loads. Specifically, users under POTS ports hang up phones, xDSL ports are deactivated, and optical modules are not installed on optical ports
    • Maximum power consumption: All ports fully carry loads. However, only 25% users under POTS ports concurrently pick up phones and the feeding current is 20 mA.
  • The board power consumption slightly varies with the power module configured for the board and discreteness of components.
Table 3-4  Power consumption and maximum frame size of boards

Board

Power Consumption

Maximum Frame Size

Control board (SCU)

H801SCUB

  • Static: 18.8 W
  • Maximum: 22 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H802SCUB

  • Static: 14 W
  • Maximum: 17 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801SCUF

  • Static: 22 W
  • Maximum: 25 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801SCUH

  • Static: 89 W
  • Maximum: 111 W (Fully configured with 10GE service board)
  • Maximum: 134 W (Fully configured with 20GE service board)
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801SCUL

  • Static: 40.4 W
  • Maximum: 42.1 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801SCUN

  • Static: 41 W
  • Maximum: 62 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H802SCUN

  • Static: 30 W
  • Maximum: 50 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801SCUK

  • Static: 30 W
  • Maximum: 50 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801SCUV

  • Static: 89 W
  • Maximum: 111 W (Fully configured with 10GE service board)
  • Maximum: 134 W (Fully configured with 20GE service board)
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

Control board (MCU)

H801MCUD

  • Static: 24 W
  • Maximum: 26 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801MCUD1

  • Static: 29 W
  • Maximum: 33 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801MCUE

  • Static: 24 W
  • Maximum: 26 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

Upstream interface board (GIU)

H801GICD

  • Static: 5.3 W
  • Maximum: 5.3 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801GICE

  • Static: 5.8 W
  • Maximum: 11.8 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801GICF

  • Static: 3.9 W
  • Maximum: 3.9 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801GICG

  • Static: 6.3 W
  • Maximum: 9.2 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801GICK

  • Static: 6.6 W
  • Maximum: 7 W
2000 bytes

H802GICK

  • Static: 7 W
  • Maximum: 9 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801GSCA

  • Static: 8 W
  • Maximum: 10 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801X1CA

  • Static: 11.1 W
  • Maximum: 11.3 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801X2CA

  • Static: 20.2 W
  • Maximum: 20.5 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801X2CS

  • Static: 17.6 W
  • Maximum: 18 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H802X2CS

  • Static: 7 W
  • Maximum: 9 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801X2CK

  • Static: 7 W
  • Maximum: 9 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H802P2CA

  • Static: 9 W
  • Maximum: 10 W
2004 bytes

Universal interface board (GPIO)

H801BIUA

  • Static: 5.3 W
  • Maximum: 5.3 W

-

H801CITA

  • Static: 1.9 W
  • Maximum: 4.3 W

-

H801CITD

  • Static: 3.64 W
  • Maximum: 4.55 W

-

Power interface board (PRT)

H801PRTA

  • Static: 1.5 W
  • Maximum: 1.5 W

-

H801PRTE

  • Static: 1.5 W
  • Maximum: 1.5 W

-

H801PRTG

  • Static: 0.2 W
  • Maximum: 0.2 W

-

Power interface board (MPW)

H801MPWC

  • Static: 2.5 W
  • Maximum: 2.5 W

-

H801MPWD

  • Static: 2 W
  • Maximum transfer efficiency: 93% (220 V, 100% load, 25°C)

-

H801MPWE

  • Static: 1.5 W
  • Maximum: 1.5 W

-

SPU board

H801SPUA

  • Static: 28 W
  • Maximum: 35 W
2004 bytes

H801SPUB

  • Static: 21 W
  • Maximum: 24 W
2004 bytes

H801SPUC

  • Static: 53 W
  • Maximum: 90 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801SPUF

  • Static: 32 W
  • Maximum: 50 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

Ethernet service access board

H801ETHA

  • Static: 19.6 W
  • Maximum: 27 W
1600 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801ETHB

  • Static: 20 W
  • Maximum: 21 W
2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

TDM service process board

H801CSPA

  • Static: 22 W
  • Maximum: 23 W

-

H801TOPA

  • H801NHlA daughter board:
    • Static: 24.2 W
    • Maximum: 25.3 W
  • H801EH1A daughter board:
    • Static: 24.2 W
    • Maximum: 25.3 W
  • H801O2CE daughter board:
    • Static: 24 W
    • Maximum: 24.5 W
  • H801CSSA daughter board:
    • Static: 25 W
    • Maximum: 25 W

-

H801TOPB

  • Static: 13 W
  • Maximum: 16 W

-

GPON interface board

H801GPBC

  • Static: 70.6 W
  • Maximum: 78 W
  • For V800R011C00 and earlier versions: 2000 bytes
  • For V800R012C00 and later versions: 2004 bytes

H802GPBD

  • Static: 45 W
  • Maximum: 51 W
  • For V800R011C00 and earlier versions: 2000 bytes
  • For V800R012C00 and later versions: 2004 bytes

H805GPBD

  • Static: 43 W
  • Maximum: 49 W
  • For V800R011C00 and earlier versions: 2000 bytes
  • For V800R012C00 and later versions: 2004 bytes

H802GPFD

  • Static: 45 W
  • Maximum: 73 W
2004 bytes

H805GPFD

  • Static: 26 W
  • Maximum: 50 W
2004 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H806GPBH

  • Static: 32 W
  • Maximum: 46 W
2004 bytes

H807GPBH

  • Static: 25 W
  • Maximum: 38 W
2004 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

H801GPMD

  • Static: 32 W
  • Maximum: 46 W
2004 bytes

10G GPON interface board

H802XGBC

  • Static: 67 W
  • Maximum: 85 W
2004 bytes

H801XGBD

  • Static: 26 W
  • Maximum: 50 W
2004 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

P2P interface board

H801OPFA

  • Static: 20.2 W
  • Maximum: 28.5 W
1800 bytes

H802OPGD

  • Static: 70 W
  • Maximum: 100 W
  • For V800R011C00 and earlier versions: 1800 bytes
  • For V800R012C00 and later versions: 2004 bytes

H802OPGE

  • Static: 53 W
  • Maximum: 90 W
2004 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported.

ATM interface board

H801AIUG

  • Static: 24.9 W
  • Maximum: 33.4 W

-

Combo board

H80BCAME

  • Static: 26 W
  • Maximum: 75 W
1800 bytes

H806CAME

  • Static: 22 W
  • Maximum: 69 W
1800 bytes

H80BCVME

  • 17a:
    • Static: 32 W
    • Maximum: 86 W (the convergence ration is 25%.)
  • 8b:
    • Static: 32 W
    • Maximum: 88 W (the convergence ration is 25%.)
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H806CCPE

  • 12a/17a:
    • Static: 41 W
    • Maximum: 97 W (the convergence ration is 25%.)
  • 8b:
    • Static: 41 W
    • Maximum: 103 W (the convergence ration is 25%.)
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80DCCPE

  • 12a:
    • Static: 36 W
    • Maximum: 91 W (the convergence ration is 25%.)
  • 17a:
    • Static: 36 W
    • Maximum: 92 W (the convergence ration is 25%.)
  • 8b:
    • Static: 36 W
    • Maximum: 98 W (the convergence ration is 25%.)
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80DCSPE

  • 12a:
    • Static: 36 W
    • Maximum: 99 W (the convergence ration is 25%.)
  • 17a:
    • Static: 36 W
    • Maximum: 100 W (the convergence ration is 25%.)
  • 35b:
    • Static: 36 W
    • Maximum: 103 W (the convergence ration is 25%.)
  • PTM: 2000 bytes
  • ATM: 1800 bytes

Voice board

H801ASRB

  • Static: 12 W
  • Maximum: 37 W

-

H801ASPB

  • Static: 15.5 W
  • Maximum: 64 W

-

H808ASPB

  • Static: 16 W
  • Maximum: 31 W (calculated based on the 25% convergence ratio)

-

H809ASPB

  • Static: 15 W
  • Maximum: 31 W (calculated based on the 25% convergence ratio)

-

H80BASPB

  • Static: 13 W
  • Maximum: 29 W

-

H80CASPB

  • Static: 13 W
  • Maximum: 29 W

-

H802DSRD

  • Static: 18 W
  • Maximum: 40 W

-

H802DSRE

  • Static: 18 W
  • Maximum: 40 W

-

H802EDTB

  • Static: 32 W
  • Maximum: 38 W

-

H80AATRB

  • Static: 4 W
  • Maximum: 4 W

-

ADSL2+ service access board

H808ADIF

  • Static: 12 W
  • Maximum: 49.2 W
1800 bytes

H808ADLE

  • Static: 12.4 W
  • Maximum: 56.8 W
1800 bytes

H805ADLF

  • Static: 15 W
  • Maximum: 46 W
1800 bytes

H808ADLF

  • Static: 12 W
  • Maximum: 50.4 W
1800 bytes

H802ADPD

  • Static: 25 W
  • Maximum: 82.5 W
1800 bytes

H805ADPD

  • Static: 12 W
  • Maximum: 66 W
1800 bytes

H807ADPD

  • Static: 20 W
  • Maximum: 41 W
1800 bytes

H802ADQD

  • Static: 25 W
  • Maximum: 82.5 W
1800 bytes

H802ADKM

  • Static: 28 W
  • Maximum: 81 W
1800 bytes

H80BADPE

  • Static: 12.4 W
  • Maximum: 56.8 W
1800 bytes

H807ADPE

  • Static: 20 W
  • Maximum: 41 W
1800 bytes

H808ADPM

  • Static: 15 W
  • Maximum: 62 W
1800 bytes

H807ADPM

  • Static: 22 W
  • Maximum: 43 W
1800 bytes

VDSL2 service access board

H805VDSA

  • Static: 29.4 W
  • Maximum: 76.5 W
  • PTM: 1600 bytes
  • ATM: 1800 bytes

H805VDSF

  • Static: 27.3 W
  • Maximum: 57 W
  • PTM: 1600 bytes
  • ATM: 1800 bytes

H805VDTF

  • Static: 25.7 W
  • Maximum: 60.7 W
  • PTM: 1600 bytes
  • ATM: 1800 bytes

H805VDRD

  • Static: 20 W
  • Maximum: 55 W
  • PTM: 1600 bytes
  • ATM: 1800 bytes

H805VDMF

  • 17a:
    • Static: 34 W
    • Maximum: 80 W
  • 8b:
    • Static: 34 W
    • Maximum: 87 W
  • PTM: 1600 bytes
  • ATM: 1800 bytes

H80BVDMF

  • 17a:
    • Static: 18 W
    • Maximum: 57 W
  • 8b:
    • Static: 18 W
    • Maximum: 62 W
  • PTM:1800 bytes
  • ATM:1800 bytes

H802VDNF

  • 17a:
    • Static: 35 W
    • Maximum: 90 W
  • 8b:
    • Static: 35.2 W
    • Maximum: 96 W
  • PTM: 1536 bytes
  • ATM: 1800 bytes

H802VDJM

  • 17a:
    • Static: 33 W
    • Maximum: 82 W
  • 8b:
    • Static: 33 W
    • Maximum: 99 W
  • PTM: 1536 bytes
  • ATM: 1800 bytes

H80AVDPD

  • 17a:
    • Static: 24 W
    • Maximum: 77 W
  • 8b:
    • Static: 24 W
    • Maximum: 89 W
  • PTM: 1518 bytes
  • ATM: 1800 bytes

H80BVDPE

  • 17a:
    • Static: 24 W
    • Maximum: 79 W
  • 8b:
    • Static: 24 W
    • Maximum: 86 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80BVDPM

  • 17a:
    • Static: 25 W
    • Maximum: 82 W
  • 8b:
    • Static: 25 W
    • Maximum: 89 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80BVDQM

  • 17a:
    • Static: 24 W
    • Maximum: 81 W
  • 8b:
    • Static: 24 W
    • Maximum: 82 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80BVCMM

  • 17a:
    • Static: 30 W
    • Maximum: 75 W
  • 8b:
    • Static: 30 W
    • Maximum: 77 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80AVCPD

  • 17a:
    • Static: 24 W
    • Maximum: 65 W
  • 8b:
    • Static: 24 W
    • Maximum: 70 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80DVCPD

  • 17a:
    • Static: 24 W
    • Maximum: 64 W
  • 8b:
    • Static: 24 W
    • Maximum: 70 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80AVCPM

  • 17a:
    • Static: 26 W
    • Maximum: 67 W
  • 8b:
    • Static: 26 W
    • Maximum: 72 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80DVCPM

  • 17a:
    • Static: 26 W
    • Maximum: 66 W
  • 8b:
    • Static: 26 W
    • Maximum: 72 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H806VCPE

  • 17a:
    • Static: 24 W
    • Maximum: 65 W
  • 8b:
    • Static: 24 W
    • Maximum: 70 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80DVCPE

  • 17a:
    • Static: 24 W
    • Maximum: 64 W
  • 8b:
    • Static: 24 W
    • Maximum: 70 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80DSDMM

  • 17a:
    • Static: 26 W
    • Maximum: 59 W
  • 8b:
    • Static: 26 W
    • Maximum: 58 W
  • 35b:
    • Static: 26 W
    • Maximum: 64 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80DSDPM

  • 17a:
    • Static: 29 W
    • Maximum: 73 W
  • 8b:
    • Static: 29 W
    • Maximum: 72 W
  • 35b:
    • Static: 29 W
    • Maximum: 78 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

H80DSDMM1

  • 17a:
    • Static: 22.2 W
    • Maximum: 55 W
  • 8b:
    • Static: 22.2 W
    • Maximum: 54 W
  • 35b:
    • Static: 22.2 W
    • Maximum: 58.6 W
  • PTM: 2000 bytes
  • ATM: 1800 bytes

Vectoring processing board

H806VPEA

  • Static: 21 W (not configured with service board)
  • Maximum: 51 W (fully configured with 6 VCMM boards in vectoring mode)

-

H806VPEF

  • Static: 52 W (not configured with service board)
  • Maximum: 75 W (fully configured with 6 VCPM boards in Vectoring mode)
  • Maximum: 83 W (fully configured with 6 SDMM boards in SuperVector mode)
  • Maximum: 94 W (fully configured with 6 SDPM boards in SuperVector mode)

-

H806VPGA

  • Static: 46 W (not configured with service board)
  • Maximum: 106 W (fully configured with 12 VCMM boards in vectoring mode)

-

SHDSL service access board

H803SHDA

  • Static: 22 W
  • Maximum: 26 W
  • PTM: 1594 bytes
  • ATM: 1800 bytes

H802SHLB

  • Static: 16 W
  • Maximum: 23 W
  • PTM: 1594 bytes
  • ATM: 1800 bytes

H80ASHLM

  • Static: 16 W
  • Maximum: 21 W
  • PTM: 1594 bytes
  • ATM: 1800 bytes

H802SHGM

  • Static: 22 W
  • Maximum: 29 W
  • PTM mode: 2000 bytes
  • ATM-PTM mode:
    • PTM: 1594 bytes
    • ATM: 1800 bytes

FAN

H801FCBB

  • Static: 23 W
  • Maximum: 65 W

-

H801FCBC

  • Static: 17 W
  • Maximum: 52 W

-

H801FCBH

  • Static: 21 W
  • Maximum: 88 W

-

H801FCBI (ETSI)

  • Static: 13 W
  • Maximum: 67 W

-

H801FCBI (MA5603T)

  • Static: 16 W
  • Maximum: 67 W

-

H801FMCA

  • Static: 30 W
  • Maximum: 72 W

-

H831FCBB

  • Static: 4 W
  • Maximum: 39 W

-

Environment monitoring board

H801ESCA

  • Static: 4 W
  • Maximum: related to the connected sensor

-

Daughter board

H801CKMC

  • Static: 4 W (with H801SCUN)
  • Maximum: 4 W (with H801SCUN)

-

H801CKMD

  • Static: 6 W (with H802SCUN)
  • Maximum: 7 W (with H802SCUN)

-

H801FLBA

  • Static: 3 W (with H801SCUN)
  • Maximum: 4 W (with H801SCUN)

-

H801M2XA

  • Static: 25 W (with H802SCUN)
  • Maximum: 25 W (with H802SCUN)

-

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 136870

Downloads: 3382

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next