No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
100 Ah Battery

100 Ah Battery

This topic provides the overview, outline and specifications of the 100 Ah battery.

  • Ensure that the polarity position of each battery is correct. The connection between batteries and the power system/battery interface of the device must be firm and correct.
  • When the device power supplied by the battery, it is suggested that powered on timely to avoid the battery extended storage.
  • When the device is power off, ensure that the battery switch is in the OFF state.
  • After the device is powered on, the battery parameters need to be configured in time.
The appearance and weight of the battery are only for reference, which may differ from the actual delivered battery.


Batteries are rechargeable and functions as a backup power supply for the device.


Figure 6-38 shows the outline of the 100 Ah battery.

Figure 6-38  Outline of the 100 Ah battery


The 100 Ah storage battery shown in the figure is only for reference, which may differ from the delivered storage battery.


Table 6-40 lists the specifications of the 100 Ah battery.

Table 6-40  Specifications of the 100 Ah battery



Single battery voltage

12 V

Rated capacity

100 Ah

Equalized charging voltage (four batteries in serial connection)

56.5 V

Floating charging voltage (four batteries in serial connection)

53.5 V

Maximum charging current

25.0 A

Dimensions of a single battery (width x depth x height)

330.0 mm x 173.0 mm x 218 mm

Weight of a single battery

34.3 kg


The battery charging status can be float charging or equalized charging, as described in the following:

  • Equalized charging: It is a method that fully charges the discharged battery quickly by constant voltage and limited current. The voltage is usually set high. This method balances the capacity among batteries in a battery group.
  • Float charging: It is a charging method that preserves full charge for the battery by constant voltage. The voltage is usually set low.
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 135970

Downloads: 3372

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next