No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
H802GICK Board Description

H802GICK Board Description

The H802GICK board is a 2-port GE uplink interface card that provides two GE upstream or cascading optical ports.

Functional Specifications

Please refer to "Upstream Interface Board Comparison".

Technical Specifications

Please refer to "Power Consumption and Maximum Frame Size of Boards".

Working Principle

Figure 3-30  Working principle of the H802GICK board

The basic working principle of the H802GICK board is as follows:

  • The control module reports the status of and manufacturing information about the board, and provides the interface information. The control module also manages the modules on the board, and processes alarms.
  • The interface module provides two GE ports.
  • The synchronization Ethernet clock module extracts clock signals from the GE signals, and synchronizes the 8 kHz clock of the control board with the clock signals.
  • The power module supplies power to other functional modules of the board.
  • The clock module provides clock signals for other functional modules of the board.

Front Panel Port



For details about supported optical module, see GE Optical/Electrical Module.

Indicator

Indicator

Name

Color

Status

Meaning

RUN

Running status indicator

Green

Blinking slowly (on for 1 s and off for 1 s repeatedly)

The board functions properly

Green

Blinking quickly (on for 0.25 s and off for 0.25 s repeatedly)

The board starts up and is being loaded with software

-

Off

The board is faulty

ALM

Alarm indicator

Red

On

The board is faulty or its CPLD software is being updated

-

Off

The board functions properly

LINK

Link status indicator

Green

On

The link is normal

-

Off

The link is abnormal

ACT

Data status indicator

Yellow

Blinking

Data is being transmitted

-

Off

No data is being transmitted

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 151263

Downloads: 3501

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next