No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This topic provides the configuration of the boards in the MA5608T chassis, and lists the type of the boards.

H801MABR is the backplane supported by the MA5608T. When the MA5608T is configured in a cabinet, the lower cable manager must be configured.

Figure 2-29  Configuration of boards in the MA5608T chassis (with H801MPWC or H801MPWD power board)

Figure 2-30  Configuration of boards in the MA5608T chassis (with H801MPWE power board)

Table 2-45 lists the configuration of boards in the MA5608T chassis. For details, see Board Configuration(MA5608T).

Table 2-45  Boards in the MA5608T chassis

Slot Type


Supported Board


Control board slot

2, 3

Control board

Two slots must be configured with the same control board. You are advised to configure 2 control boards working in active/standby mode.

Power board slot


H801MPWC, H801MPWD power board


4, 5

H801MPWE power board


Service board slot

0, 1

Service board
  • SPU board
  • Ethernet service access board
  • TDM service processing board
  • GPON service board
  • 10G GPON service board
  • P2P interface board
  • ATM interface board
  • Combo board
  • Voice board
  • ADSL2+ service board
  • VDSL2 service board
  • SHDSL service board

Mixed configuration of service boards is supported.

Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 152823

Downloads: 3514

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next