No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
32-Channel ADSL2+ Service Board Comparison

32-Channel ADSL2+ Service Board Comparison

The 32-channel ADSL2+ service boards support ADSL2+ over POTS, ADSL2+ over ISDN, or ADSL2+ access services.

Table 3-81  Specifications lists of 32-channel ADSL2+ service boards

Specifications

H808ADIF

H808ADLE

H805ADLF

H808ADLF

Applicable Line

ADSL2+ over ISDN

ADSL2+ over POTS

ADSL2+ over POTS

ADSL2+ over POTS

Physical Layer Retransmission (G.INP)

No

No

No

No

ADSL2+ Bonding

No

No

No

No

INM

No

No

No

No

SELT

Yes

Yes

Yes

Yes

MELT

No

No

No

No

Annex Type

  • G.992.1 Annex B/J
  • G.992.3 Annex B/J
  • G.992.5 Annex B/J
  • G.992.1 Annex A
  • G.992.3 Annex A/L/M (EU32-EU64)
  • G.992.5 Annex A/M (EU32-EU64)
  • G.992.1 Annex A
  • G.992.3 Annex A/L/M (EU32-EU64)
  • G.992.5 Annex A/M (EU32-EU64)
  • G.992.1 Annex A
  • G.992.3 Annex A/L/M (EU32-EU64)
  • G.992.5 Annex A/M (EU32-EU64)

Flexible Configuration Modes

Supports RFC2662 and RFC4706. (Users with a super user account can log in to the system and run the switch adsl mode to command in diagnose mode to switch between the configuration modes. The default configuration mode is RFC2662)

Connector

Champ 64-pin

Champ 64-pin

Champ 64-pin

Champ 64-pin

Built-in Splitter

No

Yes (600-ohm pure impedance splitter)

No

No

Temperature Query and High-temperature Alarm

Yes

Yes

Yes

Yes

Automatic Power Shutdown in Case of a High Temperature

No

Yes (Supported by V800R009C00 and later)

No

Yes (Supported by V800R009C00 and later)

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 138522

Downloads: 3409

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next