No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
H805GPBD Board Description

H805GPBD Board Description

The H805GPBD is an 8-port GPON OLT interface board. It works with the optical network unit (ONU) to provide GPON access service.

Functional Specifications

Please refer to "GPON Service Board Comparison".

Technical Specifications

Please refer to "Power Consumption and Maximum Frame Size of Boards".

Working Principle

Figure 3-67  Working principle of the H805GPBD board

The basic working principle of the H805GPBD board is as follows:
  • The control module loads the board software, controls the running of the board, and manages the board.
  • The switching module aggregates the signals from eight GPON ports.
  • The interface module converts between GPON signals and Ethernet packets.
  • The power module supplies power to other functional modules of the board.
  • The clock module provides the working clock for other functional modules of the board.

Front Panel Port



For details about supported optical module, see PON Optical Module.

Indicator

Indicator

Name

Color

Status

Meaning

RUN ALM

Running status indicator

Red

Blinking

The board enters the APP start phase during the board startup

Green

Blinking quickly (on for 0.25 s and off for 0.25 s repeatedly)

The board enters the phase of communication with the control board during its startup

Green

Blinking slowly (on for 1 s and off for 1 s repeatedly)

The board works in the normal state

Orange

Blinking

A high-temperature alarm is generated

Red

On

The board is faulty

BSY

Port status indicator

Green

Blinking

The board carries services

-

Off

The board carries no service

0, 1, 2 ...

PON port indicator

Green

On

The ONT of the related PON port is online

Green

Blinking

The optical module does not take effect

-

Off

The ONT of the related PON port is offline

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 136533

Downloads: 3380

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next