No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Heat Dissipation

Heat Dissipation

The MA5623AR supports a high density of user access. In addition, the MA5623AR adopts an optimal design to implement wind cooling heat dissipation.

Two fans are located in the right side of the MA5623AR, used for ventilation of the chassis in the exhaust mode.

The airflow is as follows: the cool air enters the MA5623AR at the left side, and is blown towards the right side by the fans, and finally, exits at the right side of the MA5623AR

Figure 2-18 shows the airflow for the MA5623AR

Figure 2-18  Airflow for the MA5623AR

MA5623AR supports automatic setting the fan speed, the fan speed is automatically adjusted according to the temperature detected by the temperature sensor configured on the control board.

The fans of the MA5623AR support alarm report when the fan is blocked.

Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 155388

Downloads: 3549

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next