No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This topic provides the configuration of the boards in the MA5603T service subrack, and lists the type of the boards.

H801MABO and H802MABO are the backplanes supported by the MA5603T. H801MABO does not support the Vectoring feature, and H802MABO supports the Vectoring feature.

Figure 2-21  Configuration of boards in the MA5603T service subrack

Table 2-34 lists the configuration of boards in the MA5603T service subrack. For details, see Board Configuration(MA5600T/MA5603T).

Table 2-34  Boards in the MA5603T service subrack

Slot Type


Supported Board


Control board (SCU) slot


Control board

Two slots must be configured with the same control board. You are advised to configure 2 control boards working in active/standby mode.

Uplink interface board (GIU) slot


Uplink interface board

Mixed configuration of upstream interface boards is supported; however, it is recommended to use the same upstream interface board in the configuration.

Filler Panel




Power board slot


Power board

It is recommended to configure the same power board in the two slots.

Universal interface board (GPIO) slot


  • Universal interface board
  • Vectoring processing board


Service board slot


  • Service board
    • SPU board
    • Ethernet service access board
    • TDM service processing board
    • GPON service board
    • 10G GPON service board
    • P2P interface board
    • ATM interface board
    • DSL&POTS Combo board
    • Voice board
    • ADSL2+ service board
    • VDSL2 service board
    • SHDSL service board
  • SPL board
    • ADSL2+ SPL board
    • VDSL2 SPL board
  • Extension board

Mixed configuration of service boards is supported. When the SPL board is configured in the slot, select the slot next to the corresponding service board.

Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 137465

Downloads: 3405

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next