No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Appearance and Ports

Appearance and Ports

The MA5623AR box-shaped device has a fan tray at the right. The subrack is installed in the cabinet through the mounting brackets.

The MA5623AR provides two configuration models, which differ in the power supply mode (DC or AC). Figure 2-14 and Figure 2-15 show the appearance of MA5623AR. Table 2-26 describes the ports on MA5623AR.

Figure 2-14  Appearance of an AC-powered MA5623AR

Figure 2-15  Appearance of an DC-powered MA5623AR

Table 2-26  Ports on a MA5623AR

Port Name

Silk Screen

Number of Ports

Function

AC power port

1

Connects to 110 V or 220 V AC power.

DC power port

1

Connects to 48 V DC power.

Ground point

1

Connects the device to the ground.

Uplink optical port

0, 1

2

GE optical port:
  • Uses the small form-factor pluggable (SFP) optical module.
  • Supports different transmission distances using various SFP optical modules.
  • Supports single-mode and multi-mode optical modules.

Maintenance network port

ETH

1

It is a 100M Base-T commissioning network port and supports 100 Mbit/s full-duplex autonegotiation.

Maintenance serial port/Environment monitoring port (RS-232 port)

CONSOLE

1

The MA5623AR provides one serial port, which can function as a maintenance serial port and maintenance network port at the same time after a console-Ethernet integrated cable is connected to it.

  • During the BIOS loading process, this serial port can only be used as a maintenance serial port. In this case, the first user port on the device can be used as the maintenance network port.
  • When the device is running, the functions of this port are as follows:
    • It can be used as a maintenance serial port. In this case, you can configure a user port on the device to manage the device locally.
    • It can function as a maintenance serial port and maintenance network port at the same time after a console-Ethernet integrated cable is connected to it.
  • When the serial port mode of the MA5623AR is emu, can be connected to environment monitoring unit (EMU) to monitor the digital parameter. The port can also be used for the communication between the device and Fe-lithium batteries.

Battery port

BAT-/BAT+

1

The port is used to connect the device to lead-acid batteries. The port uses a design that protects against inverse cable connector insertion, and the through-current capacity is 16 A.
NOTE:
The DC-powered MA5623AR does not support the battery port.

Battery sensor port

SENSOR

1

The port supports external temperature sensors if the device uses an AC power source and lead-acid batteries.

NOTE:
The DC-powered MA5623AR does not support the battery sensor port.

Environment monitoring port

ALARM

1

Supports four digital sensors: door status, surge protection, main distribution frame, and smoke sensors.

VDSL2 Port

xDSL0 and xDSL1

2

The VDSL2 port supports a maximum transmission distance of 3.5 km (11,482 feet) and supports VDSL2 service access in 48 channels.
NOTE:
For pin assignments of the xDSL0 port, see Table 2-27. For pin assignments of the xDSL1 port, see Table 2-28.

Mounting ears

2

Used for fixing the device.

Table 2-27  Pin assignments of the xDSL0 port

Pin

Signal

 

Pin

Signal

Port

Pin

Signal

 

Pin

Signal

64

15

 

48

7

32

16

 

16

-

63

47

31

15

62

14

46

6

30

17

14

-

61

45

29

13

60

13

44

5

28

18

12

-

59

43

27

11

58

12

42

4

26

19

10

-

57

41

25

9

56

11

40

3

24

20

8

-

55

39

23

7

54

10

38

2

22

21

6

-

53

37

21

5

52

9

36

1

20

22

4

-

51

35

19

3

50

8

34

0

18

23

2

-

49

33

17

1

Table 2-28  Pin assignments of the xDSL1 port

Pin

Signal

 

Pin

Signal

Port

Pin

Signal

 

Pin

Signal

64

39

 

48

31

32

40

 

16

-

63

47

31

15

62

38

46

30

30

41

14

-

61

45

29

13

60

37

44

29

28

42

12

-

59

43

27

11

58

36

42

28

26

43

10

-

57

41

25

9

56

35

40

27

24

44

8

-

55

39

23

7

54

34

38

26

22

45

6

-

53

37

21

5

52

33

36

25

20

46

4

-

51

35

19

3

50

32

34

24

18

47

2

-

49

33

17

1

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 138217

Downloads: 3405

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next