No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
H801BIUA Board Description

H801BIUA Board Description

The H801BIUA board is a BITS interface Unit board, providing BITS input and output functions.

Functional Specifications

The H801BIUA board supports the following functions:

  • Two standard BITS clock inputs and one standard BITS clock output
  • Input and output of 2 MHz and E1 signals
  • Tracing the input clock source of the two channels of BITS clock or tracing the output clock source of the control board
  • Multiple working modes, such as tracing, holdover, and free-run

Technical Specifications

Please refer to "Power Consumption and Maximum Frame Size of Boards".

Working Principle

Figure 3-38  Working principle of the H801BIUA board

The basic working principle of the H801BIUA board is as follows:

  • The control module loads the board software, controls the running of the software, and manages the entire board.
  • The BITS clock processing module selects the mode and separates the two channels of input BITS clock signals, restores the clock for 2 Mbit/s signals, shapes the 2 MHz signals, and outputs one channel of 2 Mbit/s or 2 MHz clock signals.
  • The stratum-3 clock daughter board module provides the stratum-3 system clock with the accuracy of ±4.6 ppm.
  • The clock module provides clock signals for each functional module of the board.
  • The power module supplies power to each functional module of the board.

Front Panel Port



Indicator

Indicator

Name

Color

Status

Meaning

RUN

Running status indicator

Green

Blinking slowly (on for 1 s and off for 1 s repeatedly)

The board works in the normal state

Green

Blinking quickly (on for 0.25 s and off for 0.25 s repeatedly)

The board is starting up

-

Off

The board is faulty or power off

ALM

Alarm indicator

Red

On

The board is faulty or its CPLD software is being updated

-

Off

The board functions properly

IN0,IN1

Clock input status indicator

Green

On

Clock signals are input

-

Off

No clock signal is input

Daughter Board

The H801BIUA board can be installed with one clock daughter board.

Figure 3-39  Position of the daughter board on the H801BIUA board

Table 3-21  Daughter board supported by the H801BIUA board

Daughter Board

Function

Remarks

CKMA

Provides 32.768 MHz clock signals.

Traces the external reference source (8K signals), and outputs the synchronized 32.768 MHz clock signals.

This daughter board supports three working modes: free-run, tracing, and holdover.

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 153776

Downloads: 3530

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next