No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
P2P Interface Board Comparison

P2P Interface Board Comparison

In the table, "Yes" indicates "supported" and "No" indicates "not supported".

Table 3-38  Specifications lists of P2P interface boards

Specification

H801OPFA

H802OPGD

H802OPGE

Port Quantity

16

24/48

24/48

Optical Module

eSFF FE

CSFP (48-channel) or SFP (24-channel) GE/FE

CSFP (48-channel) or SFP (24-channel) GE/FE

Limit on the Traffic Classification Parameters

N/A

  • The user VLAN ID ranges from 1 to 4093, but cannot be set to 4094 or 4095.
  • The user VLAN packets cannot be priority-tagged.
  • The user VLAN ID ranges from 1 to 4093, but cannot be set to 4094 or 4095.
  • The user VLAN packets cannot be priority-tagged.

Cascading and aggregation of DSLAMs or MDUs

No

Yes

NOTE:
You can run the network-role command in the opg mode to switch the board role. Default board role is user.

Yes

NOTE:
You can run the network-role command in the opg mode to switch the board role. Default board role is user.

Synchronous Ethernet clock issuing

Yes
NOTE:

The H801OPFA board only issues synchronous Ethernet clock signals (line recovered clock signals using the interface board), which cannot be used as the system clock source.

Yes

Yes

1588v2 clock issuing

No

No

Yes

Inter-board aggregation and load sharing

No

Yes

Yes

9216-byte jumbo frames

No

No

Yes

Temperature query

Yes

Yes

Yes

Automatic power shutdown in case of a high temperature

No

Yes

Yes

Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 151270

Downloads: 3501

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next