No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MA5600T, MA5603T, and MA5608T Hardware Description 25

This manual describes the Huawei MA5600T, MA5603T, and MA5608T hardware specifications, such as dimensions, weight, power consumption, capacity, structure, chassis, slots, boards, power modules, and optical modules.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration

Configuration

The MA5600T ETSI SPL service subrack can be configured with 16 SPL boards.

Configuration

The MA5600T ETSI SPL service subrack provides 22 slots.

Figure 2-8  Configuration of boards in the MA5600T ETSI SPL service subrack

Table 2-12  Boards in the MA5600T ETSI SPL service subrack

Slot

Supported Board

1-8,11-18

SPL board

0,9,10,19-21

Filler panel

NOTE:
The ETSI SPL service subrack is used to accommodate the low-density SPL board, high-density SPL board with built-in front panel, and transfer board with built-in front panel.
Download
Updated: 2019-03-18

Document ID: EDOC1000060621

Views: 138565

Downloads: 3409

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next