No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is Required When I Apply for a CE Series Switch License?

What Is Required When I Apply for a CE Series Switch License?

When applying for a license, you must provide the following information:

  • Authorization ID (LAC), Activation ID, or contract No.

    You can obtain the information from the license authorization certificate.

  • Equipment serial number (ESN). To apply for a license for a stack system, you need to provide ESNs of all member devices.

    The method of obtaining an ESN varies according to the software version:

    • Versions earlier than V100R005C00

      For CE12800 series switches, run the display esn command.
      <HUAWEI> display esn
      ESN of chassis 1 : 21023553380DCCE12808
      For CE7800 series switches, run the display device manufacture-info command.
      <HUAWEI> display device manufacture-info
      Slot       Card   Type               Serial-number            Manu-date
      1          --     CE7850-32Q-EI      210235925010E9000010     2014-09-19
                 FAN1   FAN-40HA-F         210235909610E9000038     2014-09-11
                 FAN2   FAN-40HA-F         210235909610E9000024     2014-09-11
                 PWR1   PAC-600WA-F        2102310PMJD0E9000037     2014-09-09
                 PWR2   PAC-600WA-F        2102310PMJD0E9000010     2014-09-08
    • V100R005C00 and later versions

      For CE12800, CE12800E, CE8800, CE7800, CE6800, and CE5800 series switches, run the display sn license command.
      <HUAWEI> display sn license
      Equipment SN(ESN) for license:
       Chassis 1 ESN: 21023553380DCCE12801

For details about the CE series switch license, including license introduction, common operations, and application procedure, see the CloudEngine Series Switches License Usage Guide.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 616540

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next