No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can a 10GE Interface on a CloudEngine Series Switch Connect to a GE Interface?

Can a 10GE Interface on a CloudEngine Series Switch Connect to a GE Interface?

A 10GE optical interface can connect to a GE optical interface in the following situations:
  • The 10GE optical interface has a GE optical module installed. No other configuration is required.
  • The 10GE optical interface has a GE copper module installed and negotiates with the remote interface to use the same rate and duplex mode.

By default, auto-negotiation is enabled on a 10GE electrical interface. A 10GE electrical interface can connect to a GE electrical interface when they negotiate to use the same rate and duplex mode.

You can run the display interface [ interface-type [ interface-number ] ] command in any view to check the Speed and Duplex fields of the local and remote interfaces to determine whether the two interfaces use the same rate and duplex mode.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 603890

Downloads: 2938

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next