No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Troubleshooting Flowchart

Troubleshooting Flowchart

After the BGP ORF function is enabled, a local BGP peer (route sender) is prevented from receiving ORFs from a remote peer (route receiver). Run the display bgp peer ipv4-address orf ip-prefix command. The command output does not contain any IP-prefix information.

The troubleshooting roadmap is as follows:
  • Check whether a BGP peer relationship is set up successfully.
  • Check whether the BGP ORF capability is negotiated successfully.
  • Check whether an import IP-prefix policy is configured on the remote peer (route receiver).
  • Check whether the prefix list corresponding to the import IP-prefix policy is configured on the remote peer (route receiver).

Figure 14-8 shows the troubleshooting flowchart.

Figure 14-8 Troubleshooting flowchart for the fault that prevents a local BGP peer (route sender) from receiving ORFs from a remote peer (route receiver)
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 604207

Downloads: 2938

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next