No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Troubleshooting Guide
CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can Converted Interfaces Be Added to an Eth-Trunk?

Can Converted Interfaces Be Added to an Eth-Trunk?

Converted interfaces can be added to an Eth-Trunk. The configuration method is the same as that of common physical interfaces.

# Add the converted interface 40GE1/0/1:1 to Eth-Trunk2.
<HUAWEI> system-view
[~HUAWEI] interface eth-trunk 2
[*HUAWEI-Eth-Trunk2] trunkport 40ge 1/0/1:1
[*HUAWEI-Eth-Trunk2] commit
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 656728

Downloads: 3042

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next