No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Do CE Series Switches Support Association Between Static Routes and NQA?

Do CE Series Switches Support Association Between Static Routes and NQA?

CE series switches except the CE6810LI support association between static routes and NQA. To specify the administrator name of the NQA test instance associated with the specified static route and specify the NQA test instance name, run the ip route-static ip-address { mask | mask-length } { nexthop-address | vpn-instance vpn-instance-name nexthop-address } track nqa admin-name test-name command.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 608539

Downloads: 2951

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next