No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Prevent a DHCP Server from Allocating an IP Address in Use to Another Client?

How Do I Prevent a DHCP Server from Allocating an IP Address in Use to Another Client?

To prevent a DHCP server from allocating an IP address in use to another client, run the dhcp server ping { packet number | timeout milliseconds } * command in the system view of the DHCP server to set the maximum number of ping packets to be sent and the maximum response time of a ping packet.

If this command is run, the DHCP server sends a ping packet to check whether an IP address is in use before allocating the IP address to a client. If there is no response to the ping packet within the maximum response time specified by milliseconds, the DHCP server continues to send ping packets until the number of sent ping packets reaches the maximum number specified by number. If there is still no response, the DHCP server considers that no device on the local network segment uses the IP address, and allocates the IP address to the client.

The time for the DHCP server to detect whether an IP address is in use should not be too long; otherwise, DHCP clients cannot obtain IP addresses. It is recommended that the configured total detection time (maximum number number of sent ping packets x maximum response time milliseconds of a ping packet) be less than 8 seconds.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 607740

Downloads: 2950

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next