No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Troubleshooting Guide
CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure Traffic Replication Using Another Method But Not Flow Mirroring?

How Do I Configure Traffic Replication Using Another Method But Not Flow Mirroring?

When the switch that uses other functions such as port mirroring replicates traffic of the uplink interface to the downlink Eth-Trunk, traffic may be unevenly load balanced on the downlink Eth-Trunk. You can run the port downlink interface-type { interface-number1 [ to interface-number2 ] } &<1-5> command to configure the switch to replicate traffic of uplink interfaces to the downlink Eth-Trunk.

# Configure the switch to replicate traffic on 10GE1/0/1 to Eth-Trunk 1.

<HUAWEI> system-view
[~HUAWEI] interface 10ge 1/0/1
[~HUAWEI-10GE1/0/1] port downlink interface eth-trunk 1
[*HUAWEI-10GE1/0/1] commit
  • Uplink and downlink interfaces cannot be located on the CE-L24XS-EA, CE-L48XS-EA, CE-L48GT-EA, CE-L48GT-EC, CE-L48GS-EA, or CE-L48GS-EC card.

  • CE12800 of V100R003C10 and later versions supports traffic replication. Only the CE6870EI and CE6875EI of CE8800, CE7800, CE6800, and CE5800 series switches support traffic replication, other devices do not support this function.

  • All the interfaces that join the downlink Eth-Trunk replicate traffic on uplink interfaces.

  • The switch can replicate traffic of up to 24 uplink interfaces to downlink interfaces, and traffic on one uplink interface can be replicated to up to 5 downlink interfaces.

  • This function is invalid for the Eth-Trunk that contains GE member interfaces.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 661828

Downloads: 3050

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next