No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can GE Optical Modules Be Used on 10GE Interfaces?

Can GE Optical Modules Be Used on 10GE Interfaces?

Except for 10GE optical interfaces on the CE-L48XS-FG card, 10GE optical interfaces on CloudEngine series switches support GE optical modules and GE copper modules. When GE optical modules are installed, 10GE optical interfaces work only at the rate of 1000 Mbit/s.

When a GE copper module is installed on a 10GE optical interface, the interface works as follows:
  • In V100R001C00, the interface cannot connect to a 10M/100M interface.
  • In V100R002C00 and later versions,
    • Interfaces 24-35 on the CE-L48XS-FDA/CE-L48XS-FD card cannot be connected to 10M/100M interfaces. Under other circumstances, 10GE optical interfaces can be connected to 10M/100M interfaces.
    • On the CE8860EI, CE8861EI, CE8868EI, CE6865EI, and CE6860EI, such an interface cannot connect to a 10M/100M/1000M interface.
    • On the CE5810EI, CE6857E, and CE6875EI, such an interface can only connect to a 1000M interface.
    • On the CE6880-24S4Q2CQ-EI, such an interface can only connect to a 100M/1000M interface.
    • On the CE6880-48S4Q2CQ-EI, interfaces 1 to 12 can connect to 10M/100M/1000M interfaces, whereas interfaces 13 to 48 can only connect to 100M/1000M interfaces.
    • On other switch models, such an interface can only connect to a 10M/100M interface.
    • In V200R005C00 and earlier versions, 10GE optical ports on the CE-L48XS-FD1 do not support GE optical or copper modules. In V200R005C10 and later versions, 10GE optical ports on the CE-L48XS-FD1 support GE optical and copper modules. When a GE copper module is installed on a 10GE optical port, the port supports only the rate of 1000 Mbit/s.
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 608673

Downloads: 2951

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next