No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Configure Logs at a Certain Level and Higher to Be Sent to the Log Server?

How Can I Configure Logs at a Certain Level and Higher to Be Sent to the Log Server?

You can configure the device to send logs at a specified level and higher to the log server. For example, configure the device to send logs at the notification and higher levels to the log server with IP address 192.168.10.1.

<HUAWEI> system-view
[~HUAWEI] info-center loghost 192.168.10.1 channel loghost level notification
[*HUAWEI] commit
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 604137

Downloads: 2938

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next