No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Change the Stack Domain ID?

How Do I Change the Stack Domain ID?

A stack domain ID identifies a stack system on a network. Member switches in the same stack system must have the same stack domain ID configured. Otherwise, these switches cannot set up a stack system together.

By default, a switch has no stack domain ID. If a switch has no stack domain ID, the stack domain ID configured for this switch takes effect after the switch configuration is saved. If you change the existing stack domain ID later, the new ID takes effect after the switch configuration is saved and the switch restarts.

Changing the Stack Domain ID of the CE12800, CE12800E, and CE16800

  • If the stacking function has not been enabled on the switch, run the stack domain domain-id command to change the stack domain ID.

    <HUAWEI> system-view
    [~HUAWEI] stack
    [~HUAWEI-stack] stack domain 10
  • If the stacking function has been enabled on the switch, run the stack member { member-id | all } domain domain-id command to change the stack domain ID.

    <HUAWEI> system-view
    [~HUAWEI] stack
    [~HUAWEI-stack] stack member 1 domain 10

Changing the Stack Domain ID of the CE8800, CE7800, CE6800, and CE5800

Run the stack member { member-id | all } domain domain-id command to change the stack domain ID.

<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] stack member 1 domain 10
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 613358

Downloads: 2962

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next