No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Fan Was Damaged

Fan Was Damaged

Fault Description

The display device alarm hardware command output contains the following fan alarm.

<HUAWEI> display device alarm hardware
Index  Level    Date       Time           Info                                  
1      critical 2013-04-10 03:03:36       The fan partially failed.(FanID=FAN 1, 
                                          Reason=The first fan failed.)

Possible Causes

  • Fan is damaged.

Troubleshooting Procedure

  1. Use a new fan module.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 606128

Downloads: 2941

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next