No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Restore Stack Member Ports as Ordinary Service Ports?

How Do I Restore Stack Member Ports as Ordinary Service Ports?

Perform the following operations to restore stack member ports as ordinary service ports:
  1. Remove stack member ports from a logical stack port. Two methods are available:

    • In the stack port view, run the undo port member-group interface interface-type { interface-number1 [ to interface-number2 ] } &<1-32> command.

      <HUAWEI> system view
      [~HUAWEI] interface stack-port 1/1
      [~HUAWEI-Stack-Port1/1] undo port member-group interface 10ge 1/0/1
      
    • In the interface view, run the undo stack-port command.

      <HUAWEI> system view
      [~HUAWEI] interface 10ge 1/0/1
      [~HUAWEI-10GE1/0/1] undo stack-port
      
  2. Delete the stack member port configuration from ports to restore the ports as ordinary service ports. Two methods are available:

    • In the stack management view, run the undo port mode stack interface interface-type { interface-number1 [ to interface-number2 ] } &<1-32> command.

      <HUAWEI> system-view
      [~HUAWEI] stack
      [~HUAWEI-stack] undo port mode stack interface 10ge 1/0/1
      
    • In the interface view, run the undo port mode stack command.

      <HUAWEI> system view
      [~HUAWEI] interface 10ge 1/0/1
      [~HUAWEI-10GE1/0/1] undo port mode stack
      
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 604661

Downloads: 2938

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next