No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Does the CloudEngine 12800 and 12800E Series Switches Support Queue-based Traffic Statistics on Multicast Packets?

Does the CloudEngine 12800 and 12800E Series Switches Support Queue-based Traffic Statistics on Multicast Packets?

The support for queue-based traffic statistics on multicast packets on CloudEngine 12800 and 12800E series switches is as follows:
  • CE12800

    For CE-L48XS-FDA cards, in V200R005C10 and earlier versions, statistics on multicast traffic cannot be collected, and only queue-based traffic statistics on unicast packets can be collected. Starting from V200R019C00, statistics on multicast traffic can be collected. To check the queue-based traffic statistics on packets on an interface, run the display qos queue statistics interface interface-type interface-number command in any view.

    For cards other than CE-L48XS-FDA, queue-based traffic statistics on multicast packets can be collected, and traffic statistics on multicast packets can also be collected independently. To check the queue-based traffic statistics on multicast packets on an interface, run the display qos queue statistics multicast interface interface-type interface-number command in any view.

  • CE12800E equipped with ED-E/EG-E/EGA-E series cards

    The switch supports queue-based traffic statistics on multicast packets, which are included in queue-based traffic statistics and cannot be collected separately. To check the queue-based traffic statistics on an interface, run the display qos queue statistics interface interface-type interface-number command in any view.

  • CE12800E equipped with FD-X series cards

    The switch supports queue-based traffic statistics on multicast packets. Traffic statistics on multicast packets can also be collected independently. To check the queue-based traffic statistics on multicast packets on an interface, run the display qos queue statistics multicast interface interface-type interface-number command in any view.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 618331

Downloads: 2969

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next