No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Are Cards of the CloudEngine 12800 and 12800E Series Switches Hot Swappable?

Are Cards of the CloudEngine 12800 and 12800E Series Switches Hot Swappable?

All the cards of the CloudEngine 12800 and 12800E series switches are hot swappable.

  • Main Processing Units (MPUs) and Centralized Monitoring Units (CMUs) support 1:1 hot standby.
  • Switch Fabric Units (SFUs) support N+M hot standby. To remove an SFU, hold down the OFL button (at the bottom of the enlarged image) for at least 6s until the OFL indicator turns red (at the top of the enlarged image). Then remove the SFU from the chassis. Packets may be lost if you remove the SFU before the OFL indicator turns red.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 607214

Downloads: 2948

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next