No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Assign Ports to VSs?

How Do I Assign Ports to VSs?

VSs work in group mode and port mode. The Admin-VS cannot be configured and can be considered a VS in port mode.
  • All the ports on the same forwarding chip of an LPU must be assigned to VSs in group mode, as shown in Figure 22-80.

    Figure 22-80 Port assignment for VSs in group mode
    To check which ports on an LPU belong to the same chip, run the display device port-map [ slot slot-id ] command in the user or system view.
    <HUAWEI> display device port-map slot 1
    Slot    Type           Engine    Interface
    1       CE-L24XS-EA    0         10GE1/0/0     - 10GE1/0/23
    For example, if 24 ports on a CE-L24XS-EA belong to the same forwarding chip, all these ports will be assigned to VSs in group mode.
  • Any ports on an LPU can be assigned to VSs in port mode according to network requirements, as shown in Figure 22-81.

    Figure 22-81 Port assignment for VSs in port mode
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 607216

Downloads: 2948

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next