No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can I Increase the Number of Stack Links After a Stack Has Been Set Up?

Can I Increase the Number of Stack Links After a Stack Has Been Set Up?

After a stack has been set up, you can increase the number of stack links as required. To add more stack links, add new ports to stack ports and then connect these new ports using cables. In this process, you do not need to remove stack cables or restart the stack.

  1. Add new ports to stack ports.
    <HUAWEI> system view
    [~HUAWEI] interface stack-port 1/1
    [~HUAWEI-Stack-Port1/1] port member-group interface 10ge 1/0/3 to 1/0/4
    [*HUAWEI-Stack-Port1/1] quit
    [*HUAWEI] interface stack-port 2/1
    [*HUAWEI-Stack-Port2/1] port member-group interface 10ge 2/0/3 to 2/0/4
    [*HUAWEI-Stack-Port2/1] commit
  2. Connect these new ports.

If you connect new ports using cables and then add these ports to stack ports, you are advised to shut down these ports before connecting them using cables and enable them after they have been added to stack ports.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 610259

Downloads: 2956

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next