No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Troubleshooting Flowchart

Troubleshooting Flowchart

The troubleshooting roadmap is as follows:

  • Check whether sFlow sampling is configured on the interface.
  • Check whether the sFlow Collector is specified on the interface.
  • Check whether there is a reachable route between the device and sFlow Collector.

Rectify the fault according to Figure 21-1.

Figure 21-1 Troubleshooting flowchart used when the sFlow Collector cannot receive sFlow sampling packets
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 608658

Downloads: 2951

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next