No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Common Causes

Common Causes

This fault is commonly caused by one of the following causes:

  • Routes are inactive because their next hops are unreachable.

  • Routes fail to be advertised or received because the routing policies are configured incorrectly.

  • Private network routes fail to be advertised because the number of labels exceeds the upper limit.

  • Routes are inactive because they fail to be iterated to a tunnel.

  • Routes fail to be added to the VPN routing table because the configured import route-target (RT) and export RT do not match.

  • The received routes are dropped because there is an upper limit on the number of routes on the device.

Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 618301

Downloads: 2969

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next