No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The Interface Restores to Be Up Within the Aging Time. Can a Switch Detect MAC Address Flapping in the Remaining Aging Time?

The Interface Restores to Be Up Within the Aging Time. Can a Switch Detect MAC Address Flapping in the Remaining Aging Time?

By default, the aging time of flapping MAC addresses is 300 seconds. If the error-down auto-recovery cause mac-address-flapping interval interval-value command is used to set the recovery delay to be smaller than the aging time of flapping MAC addresses, the interface restores to be Up after the recovery delay and when the MAC address does not flap. During the remaining aging time, the switch does not detect MAC address flapping because the aging time is not reached. To detect MAC address flapping, you are advised to set the interface recovery delay to be larger than the aging time of MAC addresses.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 618306

Downloads: 2969

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next