No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Configure Stack?

How Do I Configure Stack?

The following example describes basic stack configurations. For details, see the related product configuration manual.

Configuring Stack on CE12800, CE12800E, and CE16800 Series Switches

<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] stack member 1      //Set a stack member ID.
[*HUAWEI-stack] stack priority 150      //Set the stack priority.
[*HUAWEI-stack] stack domain 10       //Configure a stack domain ID.
[*HUAWEI-stack] stack link-type mainboard-direct      //Configure the stack connection mode. This step is required only for the CE12800 and CE12800E.
[*HUAWEI-stack] quit
[*HUAWEI] commit
[~HUAWEI] port-group group1
[*HUAWEI-port-group-group1] group-member 10ge 1/0/1 to 10ge 1/0/2
[*HUAWEI-port-group-group1] group-member 10ge 2/0/1 to 10ge 2/0/2
[*HUAWEI-port-group-group1] shutdown      //Shut down the physical member port to be added to a logical stack port.
[*HUAWEI-port-group-group1] quit
[*HUAWEI] commit
[~HUAWEI] interface stack-port 1      //Create a logical stack port.
[*HUAWEI-Stack-Port1] port member-group interface 10ge 1/0/1 to 1/0/2      //Add physical member ports to the logical stack port.
[*HUAWEI-Stack-Port1] port member-group interface 10ge 2/0/1 to 2/0/2
[*HUAWEI-Stack-Port1] quit
[*HUAWEI] commit
[~HUAWEI] port-group group1
[~HUAWEI-port-group-group1] undo shutdown      //Open the shutdown physical member ports.
[*HUAWEI-port-group-group1] quit
[*HUAWEI] commit
[~HUAWEI] quit
<HUAWEI> save      //Save the configuration.
Warning: The current configuration will be written to the device. Continue? [Y/N]: y
<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] stack enable      //Enable the stack function.
Warning: Make sure that one or more dual-active detection methods are configured once the conversion is complete and the device ente
rs the stack mode.
Current configuration will be converted to the next startup saved-configuration file of stack mode.
System will reboot. Continue? [Y/N]: y

Configuring Stack on CE8800, CE7800, CE6800, and CE5800 Series Switches

<HUAWEI> system-view
[~HUAWEI] stack
[~HUAWEI-stack] stack member 1 renumber 2 inherit-config      //Set a stack member ID.
Warning: The stack configuration of member ID 1 will be inherited to member ID 2 after the device resets. Continue? [Y/N]: y
[*HUAWEI-stack] stack member 1 priority 150      //Set the stack priority.
[*HUAWEI-stack] stack member 1 domain 10       //Set a stack domain ID.
[*HUAWEI-stack] quit
[*HUAWEI] commit
[~HUAWEI] port-group group1
[*HUAWEI-port-group-group1] group-member 10ge 1/0/1 to 10ge 1/0/4
[*HUAWEI-port-group-group1] shutdown      //Shut down the physical member port to be added to a logical stack port.
[*HUAWEI-port-group-group1] quit
[*HUAWEI] commit
[~HUAWEI] interface stack-port 1/1      //Create a logical stack port.
[*HUAWEI-Stack-Port1/1] port member-group interface 10ge 1/0/1 to 1/0/2
[*HUAWEI-Stack-Port1/1] quit
[*HUAWEI] interface stack-port 1/2
[*HUAWEI-Stack-Port1/2] port member-group interface 10ge 1/0/3 to 1/0/4
[*HUAWEI-Stack-Port1/2] quit
[*HUAWEI] commit
[~HUAWEI] port-group group1
[~HUAWEI-port-group-group1] undo shutdown      //Open the shutdown physical member ports.
[*HUAWEI-port-group-group1] quit
[*HUAWEI] commit
[~HUAWEI] quit
<HUAWEI> save      //Save the configuration.
Warning: The current configuration will be written to the device. Continue? [Y/N]: y
<HUAWEI> reboot      //Restart the device.
Warning: The system will reboot. Continue? [Y/N]: y
Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 604155

Downloads: 2938

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next