No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why No Reporter Information Is Displayed in the display igmp group Command Output?

Why No Reporter Information Is Displayed in the display igmp group Command Output?

If the display igmp group does not display any reporter information, the specified group has no group members.

Normally, after users join a group dynamically by sending IGMP Report messages, the display igmp group command can display IGMP group information. The following is an example:
<HUAWEI> display igmp group
Interface group report information of VPN instance: public net
 Vlanif100(10.1.6.2):
  Total 1 IGMP Group reported
   Group Address   Last Reporter   Uptime      Expires
   225.1.1.2       10.1.6.10       00:02:04    00:01:17

In the command output, Group Address indicates the IP address of the group that users have joined, and Last Reporter indicates the last host that has sent an IGMP Report message for the group.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 614176

Downloads: 2962

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next