No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Types of Cables Are Applicable to SIP Ports on the MPU

What Types of Cables Are Applicable to SIP Ports on the MPU

A SIP port is a combo port consisting of an electrical port and an optical port. It starts to work immediately after a cable is connected and does not require any configuration. By default, the working mode of a combo port depends on whether the electrical port or optical port has a cable connected first. If the electrical and optical ports have a cable connected at the same time, the combo port works as an optical port.

SIP ports on the CE12800 and CE12800E can use network cables or LC fibers. When LC fibers are used, the SIP ports must have GE optical modules installed.

10GE optical modules, GE optical modules, or GE copper modules can be installed in 10GE optical ports of SIP ports on the CE16800.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 616458

Downloads: 2965

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next