No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Troubleshooting Guide

CloudEngine 16800, 12800, 12800E, 8800, 7800, 6800, and 5800 Series Switches

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Split a Stack?

How Do I Split a Stack?

If a stack is not required, split the stack to restore the member switches to standalone switches.

Splitting a Stack of CE12800, CE12800E, and CE16800 Switches

  1. Disable the stack function. After the stack function is disabled, the member switches restart without a configuration file and automatically back up the stack configuration file used before the stack splits.

    <HUAWEI> system-view
    [~HUAWEI] stack
    [~HUAWEI-stack] undo stack enable member all
    Warning: Current configuration will be cleared.
    System will reboot. Continue? [Y/N]: y
  2. Remove stack cables.

Splitting a Stack of CE8800, CE7800, CE6800, and CE5800 Switches

  1. Back up the stack configuration file in case the stack needs to be set up again.

    <HUAWEI> copy stack.cfg stack_copy.cfg all
  2. Clear the configuration file for next start and restart the switch.

    <HUAWEI> reset saved-configuration
    The configuration will be erased to reconfigure.Continue? [Y/N]: y
    <HUAWEI> reboot
    Warning: The current configuration will be saved to the next startup saved-configuration file. Continue? [Y/N]: n
    Warning: The system will reboot. Continue? [Y/N]: y
  3. Remove stack cables.

Translation
Download
Updated: 2020-01-07

Document ID: EDOC1000060766

Views: 614217

Downloads: 2962

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next